How To – Do you test for lead in your Homestead?

3M Lead test kit found in most big box home improvement stores

On our recent visit to our property in Tennessee earlier this month, we decided to grab a bite to eat downtown while waiting for our check-in at our rented apartment. We will get to the apartment accommodations ( they were outstanding) in a later post.

We found this quaint little restaurant tucked away inside a shared antique store ( Antique Market) with many vintage items to choose from including this great deal pictured.  It’s called the Apple Dish Restaurant located at 114 N. Court Square in downtown Livingston, Tennessee.  They have a small Facebook presence but no website. We wish they did!  It’s definitely a DO NOT MISS for a reasonably priced and great lunch and antiques.

Why Test for Lead?

Lead can be in many items in your homestead from piping, insulation, drywall and many plastic items, believe it or not.  It can also contaminate many cooking items, especially cast iron and metal. We found this gem ( pictured above) that my wife purchased as an early birthday gift for me.  After checking with my cast iron cooking resource we discovered by the appearance and Gate mark on the piece  that it was a pre-1900 cast iron bean pot.

As old as it is, it’s usually a good idea to check for lead before using it. Since the early days many homesteaders and gun enthusiasts used these to melt lead for ammunition and other items. Ammunition was and is the most popular. If you are like many of us, you don’t want lead in your food.

As an added gift, My wife picked up this lead test kit from our local Lowes Home Improvement store.  I decided immediately to give it a try.

How to Test for Lead–

These kits cost around $10.00 and come with two small vials of the test chemicals in each packet.  The kits includes instructions for testing many items including plastic, painted items, metals and alloys, copper pipe and drywall. You will need to scrape and clean an area to be tested. Its okay to leave some dust as the test will detect lead in the dust also.

The instructions tell you to remove a test vial, crush each end marked A and B. This will release the test chemicals in each side of the tube and combine them for the testing. Shake the tube twice to mix the chemicals. The contents will turn yellow.  Squeeze the tube until the cotton swab on the end turns yellow.

Once this step is completed rub the swab on the area to be tested for about 30 seconds. If the end of the cotton swab turns RED OR PINK their is Lead present.  I chose to test the bottom inside of the pot as this would be the area most likely to have any lead residue. Fortunately, my test did not turn red or pink, which was great news!

The kit will also include a small cardboard panel with circles on it. Each of these circles contain lead. After completing the lead test on the items tested, place the swab in one of the circles and move it around inside the circle. If the circle doesn’t turn red or pink, this indicates that your test was performed correctly and no presence of lead.

It is a relatively easy test to perform and give you some peace of mind about ingesting any lead.

Be sure to follow along as i am still working on our Blog post from our recent Homestead visit and the work completed.

 

Leave a Reply

Your email address will not be published. Required fields are marked *